Last year, I spent a lot of time searching for the perfect dining table. I scoured Facebook Marketplace for an affordable look-a-like to some high end tables I loved, and found a 1980’s oak table for $25! You can find a step by step guide for how I stripped and refinished my table here!
During the refinishing process, I discovered that the table top was actually made out of MDF with a very thin veneer wood top. Some of the MDF was exposed and the veneer didn’t properly take the polycrylic I used to seal the table.
While I was absolutely in love with the base of the table, the uneven tone of the top was not making me happy and I’ve been looking for a replacement every since. The beauty of buying inexpensive, second hand furniture is you can alter it and take your time transforming it into the right piece for your home without spending a lot of money!
I recently found this butcher block island-size counter top at Lowe’s and immediately fell in love with the herringbone pattern of the natural acacia wood. The butcher block measures about 3X6 feet which is a perfect size for our small dining room. Acacia wood is incredibly durable so while it makes an excellent choice for counter tops, it’s going to make a really great table top too!
Before attaching the new top to my dining table, the raw acacia wood needed to be sealed to prevent stains and damage. This simple tutorial for sealing wood can be used for any table top or butcher block!
What Products do I need?
If your butcher block or table top still has stain or a clear protective sealer on it, you will first need to strip all of the finish off. See this post for tips!
- 320 grit sandpaper
- rag and water
- WATER BASED polycrylic sealer in your desired finish.
Selecting a water based product will prevent the wood from yellowing. I prefer a clear matte finish to achieve the look of raw wood, but you can also choose satin or high gloss.
This is a completely personal preference. Typically, I choose a foam brush, but for this butcher block, I used a good quality bristle brush because I was out of foam. You can also use a high density foam roller
How to Seal a Raw Wood Butcher Block
1. Start by making sure all surfaces are completely smooth
I used 320 grit sandpaper to soften a few rough edges on the sides, but overall, this butcher block was silky smooth!
2. Thoroughly clean all surfaces
Only use a small amount of water on your cloth or rag – no soap or cleaner! Allow the wood to dry completely.
3. Apply your first layer of polycrylic.
Make sure to brush/roll WITH the grain. You will end up with a much smoother finish. Also check for drips and runs before allowing the first coat to dry. Most sealers will advise applying at least 3 coats of finish. I applied 4 waiting the proper amount of time between coats as per the can.
4. Lightly Sand Before the Final Coat
Use 320 grit paper for a silky smooth finish. As you apply your poly, the grain of the wood will rise. If you do not sand, you will end up with a rough final product! Also double check for any drips or thick areas. This your final time to sand away any imperfections. You can hand sand or use an orbital sander. Just make sure to mask up!
5. Let it Cure
It know it’s difficult to wait to use your newly sealed top, but allow the sealer to cure according to the directions on the can! This will prevent any types of blemishes on that beautifully wood top!
Should you seal the bottom of the butcher block?
Because this butcher block will be a dining table top, I sealed every single surface just to make sure it’s protected. If there is a chance for moisture to be introduced, every single side should be sealed.
Don’t miss how we replace the top of our old table with this beautiful acacia wood. The end result is absolutely stunning!
Looking for more achievable affordable DIYs? Start here!
xoxo, L